1-1/2" TAPER PER FOOT POWDER METAL SPIRAL FLUTE BALL JOINT & TIE ROD TAPER REAMER #6052

1-1/2" TAPER PER FOOT POWDER METAL SPIRAL FLUTE BALL JOINT & TIE ROD TAPER REAMER #6052

THIS DURATECH M4 POWDER METAL HIGH SPEED STEEL SPIRAL FLUTE 1-1/2" TAPER PER FOOT BALL JOINT AND TIE ROD TAPER REAMER IS BRAND NEW AND MADE IN THE U.S.A. BY XKUT. DURATECH M4 HIGH SPEED STEEL IS AN EXTREMELY VERSATILE HIGH SPEED STEEL WHICH PROVIDES A UNIQUE COMBINATION OF HIGH WEAR RESISTANCE WITH HIGH IMPACT TOUGHNESS. A LARGE VOLUME OF VANADIUM CARBIDES PROVIDES THE HIGH WEAR RESISTANCE. THE HIGH IMPACT TOUGHNESS IS A RESULT OF THE FINE GRAIN SIZE, SMALL CARBIDES, AND SUPERIOR CLEANLINESS OF THE POWDER METALLURGY PM MICROSTRUCTURE. DURATECH M4 OFFERS IMPROVED CUTTING TOOL LIFE COMPARED TO CONVENTIONALLY WROUGHT M1, M2, M7, AND OTHER LOWER ALLOYED HIGH SPEED STEELS. WE ARE THE MANUFACTURER OF THIS REAMER AND DO NOT RESELL IT FOR HUGE PROFITS--BUY DIRECT AND GET A HIGH QUALITY AMERICAN MADE REAMER FOR LESS. 1-1/2" TAPER PER FOOT OR 7.15 DEGREE INCLUDED ANGLE. THIS IS THE CORRECT REAMER FOR THE GM CHEVY 1 TON TRE TIE ROD END HEAVY DUTY DANA 30 44 60 CROSSOVER STEERING APPLICATION. OVERALL LENGTH IS 6-1/2". FLUTE LENGTH IS 4-1/2". LARGE DIAMETER IS 1". SMALL DIAMETER IS 7/16". SHANK DIAMETER IS 1/2" WITH A SQUARE ON THE END. REAMER HAS 6 SPIRAL FLUTES. THIS TOOL CAN BE USED BY HAND WITH A TAP WRENCH OR SOCKET OR IN A DRILL PRESS OR VERTICAL MILL WITH A 1/2" OR LARGER DRILL CHUCK OR 1/2" COLLET. REMEMBER GUYS, THIS IS A REAMER NOT A DRILL! THE BASIC RULE OF THUMB IS TO RUN A REAMER AT HALF THE SPEED (RPM) AND TWICE THE FEED OF A DRILL. THIS REAMER WILL DO PRODUCTION RUNS AND CUT MATERIAL QUICKLY AT SPEEDS FROM 100 TO 400 RPM. SEE OUR OTHER AUTOMOTIVE, OFF-ROAD, AND RACING TAPERED REAMERS IN OUR EBAY STORE, "XKUT."

Manufacturer: N/A
SKU:	#6052
MPN:	#6052